RHT provides a wide selection of Multi-Function Switches, supporting versatile control functions and reliable switching performance for industrial control systems, electronic equipment, communication devices, and various electrical applications.
With various functions, operating modes, switch configurations, contact arrangements, and mounting options, our products meet different control requirements, equipment designs, and application needs.
RHT works closely with engineering teams to provide suitable Multi-Function Switch solutions, from sample evaluation and specification confirmation to design verification, product integration, and technical support.
Features
-Multiple Control Points: They allow you to control the same light fixture or set of lights from two or more different locations within a room or area. This is particularly useful in larger rooms, hallways, or staircases where multiple switch access points are needed.
-Three-Way and Four-Way Configurations: Multi-function switches commonly come in "three-way" or "four-way" configurations. A three-way switch setup allows control from two different locations, while a four-way switch setup extends this to control from three or more locations.
-Operation: They operate through a system of travelers and common terminals. Each switch has a common terminal that connects to the light fixture(s) and traveler terminals that interconnect with the travelers of other switches in the circuit.
-Wiring Complexity: Installing multi-function switches involves more complex wiring compared to single-pole switches, as it requires careful configuration of travelers and neutrals to ensure proper functionality across all control points.
Applications
1.Staircases
2.Hallways
3.Large Rooms
4.Outdoor Lighting
Specifications
Technical requirements:
1. Rated load :DS12V0.1A
2. Insulation resistance :≥100M Ω
3. Withstand voltage :AC100V50Hz/1min
4. Electrical life :50000 times
5. Ambient temperature :-25°~+70°
6. Relative humidity :40℃≤95%
7. Contact resistance :≤100mΩ
8. The handle must be turned
around ≤7° without power
9. Action force: Measure action in the PP'
tangent direction The force is ≤0.50N
10. Each part has no obvious flash,
and should be closely matched.
There must be no obvious loosening.
11. The unnoted tolerance dimensions
are GB1804-m class
Accuracy requirements.
Technical Documents
Please contact us for more information.